![]() ![]() I/we have even pointed out that all we need is some basic driver or information for this purpose and the community would take it from there. I had feeling it was because you were missing documentation on this chip and DAC. We also reached out on to the discussion forums one of the threads had to get closed because of the Windows Fanboys starting a flame war on the thread. I personally sent a email to their Public relations and Developers with not surprise haven't received a response. I and other have/are tried/trying to reach out to creative. I don't have a 32bit kernel setup at the moment to let you know if it really differs. ca0132 DOWNLOAD OK :-) DSP IS RUNNING.ģ. Takashi, first thank you for your replies it's greatly appreciated.ġ. > 64bit kernels even on the same machine? > Also, could you confirm that the behavior really differs between 32bit and > tell you that DSP is running or failed? > So, what happens if you didn't pass position_fix=1 option? Does the driver > With a Recon3D board I tested earlier, the DSP loading failed at the first > recently, we need to know whether the problem is in the DSP loading part or > Is it with the recent kernel (3.9 and later)? Since CA0132 has a DSP support Someone noted that the 32-bit kernel plays just ![]() > I was able to get a Creative CA0132 (Recon3D + Sound Blaster Z) sound card So, what happens if you didn't pass position_fix=1 option? Does the driver tell you that DSP is running or failed?Īlso, could you confirm that the behavior really differs between 32bit and 64bit kernels even on the same machine? With a Recon3D board I tested earlier, the DSP loading failed at the first module load, for example. Is it with the recent kernel (3.9 and later)? Since CA0132 has a DSP support recently, we need to know whether the problem is in the DSP loading part or it's after DSP is running. > Someone at ALSA needs to get this patched up ASAP. > but that the 64-bit kernel needs a special fix in /etc/rc.local. Someone noted that the 32-bit kernel plays just fine, > I was able to get a Creative CA0132 (Recon3D + Sound Blaster Z) sound card to Why is there no sound on this soundcard (Creative Soundblaster Z)? ca0132 DOWNLOAD FAILED!!! DSP IS NOT RUNNING. Snd 69106 33 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_pcsp,snd_hda_codec_ca0132 Snd_hda_codec 154312 4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_ca0132 config:ĬONFIG_EXTRA_FIRMWARE="ctefx.bin ctspeq.bin" With last dev-kernel (3.9-r3) I enable this. Patch to use generic parser for non-Pixel ca0132 boardsĪlsa info for ZXR (SB1510) - no sound - 3.16.2 kernelģ sound cards (onboard + Audigy SB0220 + Creative SoundBlaster Z) - only onboard audio worksĬA0132 is support, my soundcard Creative Soundblaster Z detected, but no sound. Test patch for CA0132 HD-audio controller ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |